Through Deck Kit forVIKING UNIVERSAL HEAVY DUTY, SELF-PRIMING, HAND-POWERED BILGE  PUMP
 
When the power is out you can always depend on the Viking hand-operated diaphragm bilge pump from SPX FLOW Johnson Pump. The pump is available in two models for various installation alternatives. It can be mounted behind walls, through deck and under bulkheads. Viking Universal’s mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning. While designed as a powerful bilge pump, the Viking Universal’s large Ø38 mm (1 ½") valves enable the pump to also be used for pumping toilet waste. Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation.
 
Features & Benefits 
• Heavy Duty Bilge Pump
• Self-priming
• Vertical or horizontal mounting
• Thrudeck kit enables installation behind bulkheads or below deck
• Meets ISO 15083, “Bilge pumping systems”
• Can be used for pumping toilet waste
• Fasteners for handles included
 
Technical specifications and capacity data
At 45 strokes/min and a 1 m (3.28') head (10 kPa (1.45 psi) pressure) the Viking Universal has a flow of 60 l/min -16 GPM.
Body and cover: Polypropylene plastic reinforced with 30% fiberglass
Diaphragm and valves: Nitrile rubber
Wetted parts: PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber
Maximum suction: 3 meters (10')
Maximum head: 4 meters (13')
Combined suction/head: 7 meters (23')
Connection: KlickTite™ connectors 38 mm (1½") hose. Both straight and 90˚ bends are included. Max. liquid temp.: +60°C (140°F) Weight 1,5 kg (3.3 lbs)
 
Common info before installation:
• Viking Universal can be adapted by the installer to suit different types of locations.
• For crafts in design categories A, B and C, the pump should be located operable from the steering position. See ISO 15083 Small craft – Bilge pumping systems.
• Make sure that there is enough space behind bulkhead or under deck as well as full access for service.
• Ensure that there is enough space available when the pump is installed in order to
operate pump with its handle in full strokes. Please note when cutting handle, operating force is
increasing accordingly.
• Find a useful location for storage of handle in its two clamps. 
• Changing position of inlet and outlet ports and valves in pump body will reverse the flow direction. It is important that the inlet valve is combined with the inlet port and the outlet valve is combined with outlet port; see the arrow on the ports showing the flow direction. The flap valve is for the inlet and the tricuspid valve is for the outlet.
• Select a suitable flat and sufficiently strong surface for the location of Viking Universal pump.
• Installation should be done according to ISO 15083 Small Craft – Bilge pumping systems.
• The suction inlet must be located in the deepest part of bilges.
• Keep all pipework as short as possible. Unnecessary inlet and outlet hose length will affect pump capacity.
• Please note that in your Bilge Pumping system it is possible to combine a Manual Bilge pump with an Electrical Submersible Bilge pump. See further information under Optional Accessories.
• To maximize efficiency of your bilge pumping system, use an In-Line Non-return valve close to suction inlet. See Optional accessories.
• When handling toilet waste, always use straight hose connections!