0430609 Impeller KOSHIN PBX7-55022
 
It is made from resistant materials and is suitable for a similar design, such as KOSHIN Submersible Trash Pumps with 50 Hz electric motor:
-PBX7-55022-BAA/BAB/BAC/BAD/BAE;
-PBX7-55011-BAB/BAC;
-PBX7-65011-BAB.
Impeller made for the Effective Motor Cooling System: Water is channelled through the outer wall to cool the motor for maximum endurance.
 
RESTRICTIONS
1) Make sure that the liquid in which the pump is used meets the following conditions.
Temperature: 5–40°C (41–104F°)
Viscosity: <5cP
pH: 6.5–8.0
(Do not use the pump in liquid that is combustible, flammable, or volatile, or with liquid
containing oil, pharmaceuticals, salt, strong alkali, or strong acid.)
2) Make sure that the power supply meets the following conditions.
Voltage: ±10% Frequency: ±1%
If both the voltage and frequency fluctuate, the power supply must be within half of these
tolerances.
 
Impeller inspection:
If foreign matter is stuck in the strainer or the impeller, the delivery volume will decrease and
hurt the pump's lifetime. Inspect by carrying out the following procedure.
Always remove the power plug whenever you conduct an inspection
Wash the strainer and impeller with clean water.
Wash away any dirt around the motor shaft with water.
Reassemble the components by performing the disassembly procedure in reverse order.
Always replace any damaged or worn components.
 
Attention: for 60Hz Pump use 0430608 IMPELLER 60HZ