SPX FLOW ULTIMA COMBO Cartridge Bilge Pump 500 GPH 12V (Old)
€111.00
Excluding VAT
Johnson Pump Marine Cartridge Combo bilge pump are JPM's proven Cartridge Bilge Pump combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump.
Operation: When the bilge water rises the magnet float, it floats up and the air in the float house is forced out through the vent hole. The magnet float starts the pump when bilge water reaches 50 mm. The valve closes and the magnet float stays in the start position due to vacuum inside the float house. When the bilge water has sunk to level 20 mm, air is let in through the air opening in the float house. The magnet float falls down and cuts off the power.
Bilge pump cleaning and maintenance no longer call for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses. The cartridge bilge pumps can be removed for cleaning or replacement without the use of a single tool. Lift the tab on the top, give the cartridge a twist and pull it out; that’s all there is to it. The cartridge contains an all-in-one motor/impeller unit with no loose parts.
Cartridge Pumps incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. The 500 GPH pump come with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered with both straight and a 90° smooth elbow Dura-Ports, as well as a removable check valve.
Johnson Pump Marine Cartridge Combo bilge pumps Family:
Limited 3 Year Warranty
Pre-configured with an electro-magnetic float switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
EAN Code
7330717017927





























