Reversible electronic system for oil fill and drain operations. The electronic control adjusts the speed of the motor according to oil viscosity/temperature and increases its speed during priming for faster operations. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation.

The RCS control panel integrated in the oil pumps and oil change systems allows you to remotely monitor the operation of the pump and interact with it.

Features:

● The reversibility of flow direction allows for two operative modes: DRAIN for aspiration and FILL for filling.

● Automatic regulation of the motor speed according to viscosity and temperature of the liquid. ● Stop and Start of the pump with a simple push of a button.

● Immediate reset by pressing the DRAIN and FILL buttons at the same time.

● Automatic stop after 30 seconds in presence of oil with excessive viscosity or closed tap.

● Automatic stop after 90 seconds from the end of the operation when the pump is empty.

● Automatic stop after 30 minutes of continuous operation (this option can be deactivated directly from the panel).

● Operations are signaled by luminous LEDs.

● Possibility of “High Speed” setting for diesel transfer

The oil pumps with Electronic regulator can be used in many areas, such as: Big Ships and boats, trailers and mobile homes, construction machinery, agriculture, industry, households, etc. Professional commitment and continuous growth are the basis of the experience on which MARCO S.P.A. based. based. almost 30 years. It was founded in 1970 by Giovanni Marco Franceschini and is today a world leader in the quality of small electric pumps at the highest level. The legendary reliability makes Marco products in demand where there is no risk through price compromises: sea, science, manufacturing, road transport. * Made in Italy * - no cheap imports from the Far East.

Installed to Diesel transfer Kits with electronic control MARCO 16400515 UP3-RK (15 l/min) and MARCO 16406415 UP6-RK (20 l/min). They are the Electronically controlled pumps for oil and diesel filling and draining operations. During priming the speed of the pump increases. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board. Compact design. Can be also installed for many others MARCO pumps with gear and rubber impelers. Fits in any engine room. Automatic shut-off in case of empty tank, short circuit and after 30 minutes of operation.

Technical data:

Product Name: RCS

Voltage: 12/24 V ,

For pump model: MARCO UP-1, UP-3, UP-6

Dimensions (mm): 80x80x46 ,

bores: 70 mm

IP 65

Note for pumps with the rubber impellers:

If you use it with the pump UP1-J, you can switch the flow direction, but the pump will run at 3/4 of the maximum speed. Therefore, you will have also 3/4 of its maximum flow rate.

If you use the RCS panel with the pump UP1-M, you can also switch the flow direction, but the pump will run at less than half of its full capacity